ECG MH 910 Delizioso Manual De Instrucciones página 46

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 93
OPERATING INSTRUCTIONS
STARTING
Before rst use
Read all instructions and important information.
Remove all packaging material and make sure that all the supplied parts are in good condition.
Place the multifunctional pot on an even, heat resistant and non ammable surface.
Remove all stickers from the pot surface and clean it using damp dish towel.
Wash all accessories in warm soapy water using a sponge or dish towel.
Rinse o the detergent well and dry everything thoroughly.
Do not use abrasive cleaners or scrubbers.
Never immerse the appliance, cable or plug in water.
Start
Before use, always check for damaged power cord or plug.
First, insert plug in the appliance, then plug the cable into the electrical outlet.
A tone sounds and the pot switches into standby mode.
GB
The LED display shows "- - - -", which means that the pot is in a standby mode.
The pot is ready for cooking.
General procedure for meal preparation
Prepare the food you want to cook according to the recipe.
Put the food in the cooking vessel.
Press MENU to select cooking mode according to the recipe.
Press START to begin the food cooking process.
When nished cooking, switch o the appliance by pressing OFF/WARM.
Note: When you forget to press START,after selecting the cooking mode, the pot will beep continually for 10 seconds
and after 60 seconds will switch to standby mode. If this happens, press the button ON/START and the cooking
process will start at once.
You can cancel the activated program by pressing OFF/WARM. The pot switches to standby mode. You can start
programming again.
COOKING MEALS
MANUAL mode
1.
Prepare food for baking according to the recipe.
2.
Insert the removable cooking vessel in its place.
Press MANUAL; the indicator "MANUAL" starts ashing. The LED display shows the default baking time.
3.
You can extend the default baking time using the buttons HOUR (hours) and MIN (minutes). After reaching
4.
maximum time (8 hours) the setting returns to minimum time (10 min) and using buttons HOUR and MIN
your can set again a di erent baking time.
Then press TEMP and with buttons HOUR (+) and MIN (-) adjust the baking temperature in range of
5.
40°C – 180°C. If you want to adjust at that time the baking time, press again TEMP, the baking time will show
and you can adjust it using the buttons HOUR and MIN.
6.
Press "START" to con rm the setting and start food preparation. Once the baking process starts it is no longer
possible to change the program manually. If you would need to adjust the time or the temperature you have to
press rst the button "o /warm" to cancel and then set a new time and temperature using the button MANUAL.
7.
After the set time nishes, the multifunctional pot beeps and automatically switches to "keep warm" mode. The
LED display shows the time of temperature maintenance, starting with "0000".
Until you press OFF/WARM to cancel the program, the food will be kept warm for up to 24 hours.
8.
RICE mode
1.
Prepare food for the RICE mode according to the recipe.
2.
Insert the removable cooking vessel in its place.
Press MENU repeatedly until the indicator "RICE" lights up. The LED display will show the default cooking time.
3.
46

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido