Guarantee Certificate - Erreka ROC Serie Manual De Instrucciones

RECOMMENDATIONS FOR THE USER
It is important for personal safety to follow all the instructions, Remember that automatisms for doors generate considerable forces and constitute a source of
danger.
Do not enter the action radius of the door while it is in movement. Wait until it has completely stopped.
Do not operate near the hinges or mechanical bodies in movement as they can generate dangerous situations by trapping parts of the body or clothing.
Put the door in movement only when it is visible and free of obstacles.
Do not allow children or animals to remain within the action radius or near the action radius of the door.
Do not allow children to handle or play with the opening controls.
Do not hinder the movement of the door as this can cause dangerous situations.
The electric motor of the appliance can produce heat as it is working. Do not touch the appliance until it has cooled down. If there is any problem get in touch
with qualified personnel.
Learn to use the emergency hand control system as stipulated in the instruction manual.
Make these reminders known to all the users of the installation.
To guarantee the proper functioning of the installation it is essential to follow the indications of the installer, having professionally qualified personnel periodically
service the installation.
You are particularly recommended to make sure the above personnel periodically control the proper functioning, especially of the safety elements, as well as those
parts which through use may be susceptible to wear.
Frequently examine the installation, especially the cables, springs and supports, to detect signs of wear, damage or imbalance.

GUARANTEE CERTIFICATE

Automatismos Erreka guarantees this equipment for a period of 2 years from the date of supply.
This guarantee applies to any manufacturing defect.
It is the responsibility of the installer to transport the equipment to the authorised technical service teams.
This guarantee does not include:.- Damage caused by incorrect installation or use of the equipment.
.- Damage caused by handling by non-authorised personnel.
.- Damage caused by external or atmospheric agents (flashes of lightning, flooding, etc)
17