Options; Maintenance; Other Precautions For Use - Bien-Air Dental DMX-Standard Instrucciones De Uso

Options

Converter 24/32-24
REF 1500580-001
The DMX is fed by 32 Vdc +/-10%. If
your system only has a 24 Vac feed,
we recommend that you use this
converter. This accessory enables you
to obtain optimum performance
from the MX system, by providing
two stabilised voltages: 32 Vdc (60W
continuous, 130W peak) for the MX
motor feed and 24 Vdc (12W conti-
nuous, 24W peak) for the solenoid
valve and relay feeds.
Dual Motor Switch
REF 1500554-001
We recommend this module when
using 2 MX motors with a DMX
board. It allows switching of the
3 motor phases, the 2 light connec-
tions and a solenoid valve for
cooling air. The relays are switched
simultaneously and controlled by
the MUX Control input (24 Vdc). To
connect this electronic control to the
MX system, please consult the wiring
diagram.

Maintenance

Overhaul
Never disassemble the device. For
any modification and repair, we
recommend that you contact your
regular supplier or Bien-Air Dental
directly. Bien-Air Dental asks the user
to have its dynamic instruments
checked or inspected at least once a
year.
Information
The technical specifications, illustra-
tions and dimensions contained in
these instructions are given only as
a guide. They may not be the subject
of any claim. The manufacturer
reserves the right to make technical
improvements to its equipment,
without amending these instruc-
tions. For all additional information,
please contact Bien-Air Dental SA at
the address indicated on the back
cover.
This device must to be recy-
cled. Electrical and electronic
equipment may contain dan-
gerous substances which constitute
health and environmental hazards.
The user must return the device to its
dealer or establish direct contact
with an approved body for treatment
and recovery of this type of equip-
ment (European Directive 2002/
96/EC).

Other precautions for use

The device must be used by a quali-
fied person in accordance with the
current legal provisions concerning
industrial safety, health and accident
prevention measures, and these
working instructions. In accordance
with these requirements, the opera-
tors:
• must only use operating devices
that are in perfect working order;
in the event of irregular functio-
ning, excessive vibration, abnor-
mal heating or other signs indica-
ting malfunction of the device,
the work must be stopped imme-
diately; in this case, contact a
repair centre that is approved by
Bien-Air Dental;
• must ensure that the device is
used only for the purpose for
which it is intended, must protect
themselves, their patients and
third parties from any danger, and
must avoid contamination
through the use of the product.
The device is intended for medical
treatment only; any use other than
that for which this product is inten-
ded is unauthorised and may be
dangerous. The medical device
meets all the current legal require-
ments.
The device is not authorised for use
in an explosive atmosphere (anaes-
thetic gas).
Avoid any contact with liquids.
Only use maintenance products and
components from Bien-Air Dental.
The use of other products and com-
ponents can void the guarantee.
18 18