How To Pair The Midland Btx1 Pro S To A Phone - Midland BTX1 PRO S Manual De Instrucciones

When a phone is paired to the "Vol +" or "Vol-" the "Phone" mode is activated.
An incoming call has always the higher priority, that means all other commu-
nications will be closed (Intercom, FM Radio, Music). If another incoming call
will arrive on the second phone, an alert sound will notify it.

How to pair the Midland BTX1 PRO S to a Phone

To pair the BTX1 PRO S to a Phone, you must first enter the setup mode:
1. Turn off the unit
2. Press and hold down the middle button about 7 sec., until the Red light is
on permanently.
3. Now press for 3 seconds the "Volume +" or "Volume -" button, the Blue
and Red lights will flash.
4. Enable the Bluetooth device search feature on your mobile phone. After
some seconds, "Midland BTX1 PRO S" will be displayed on your mobile
phone. Follow the pairing procedure of your Phone. If a pin code is reque-
sted you must enter "0000" (four time zero).
5. When successfully paired, the Blue light of the unit will be on for one second
and then the unit will exit the setup mode and switch to the working mode
(the Blue light will start flashing).
You can use now your Midland BTX1 PRO S together with the Phone.
How to use a Phone
After pairing your phone to the BTX1 PRO S unit you must switch to the
"Phone" mode in order to use it.
Press the middle button until you hear "Phone" from the voice announcement.
Now all the three main buttons are dedicated to the phone (see Table B).
Answering a call
When you hear the phone ring, you can answer in two different ways:
Vocally:
3 seconds after the first ring, simply say one word to answer the call and start
talking.
Manually:
Tap the "Forward" button and start talking.
26
Rejecting a call
If you don't wish to answer, you can let the mobile phone ring or press the
"Forward" button for 3 seconds (you will hear one audio confirmation tone).
Making a call
There are several ways to make a call.
From the mobile keypad:
› Dial the number on the mobile keypad:
› Press "Send" on the mobile phone.
To redial the last number:
› Phone on Vol+: Press"Forward"button for 3 seconds in order to redial the
last number (you will hear one audio confirmation tone).
› Phone on Vol-: Press"Backward"button for 3 seconds in order to redial the
last number (you will hear one audio confirmation tone).
To make a voice call
› Phone on Vol+: Briefly press"Forward"button. If your mobile phone sup-
ports voice calls, you will be asked to speak the name of the contact you
wish to call.
› Phone on Vol-: Briefly press"Backward"button. If your mobile phone sup-
ports voice calls, you will be asked to speak the name of the contact you
wish to call.
Priority: Calls have a high priority, which means that all other communications are
temporarily disabled when a call arrives.
Ending a call
There are several ways to end a call:
› Wait for the called person to end the call.
› Press the "Forward" button (you will hear an audio confirmation tone).
› Press "End" button on the mobile phone.
Speed dial
You can store one phone number in the unit memory and use it when needed.
You must first save the number using the "BT PRO UPDATER" Pc software
or the smartphone "BT SET-APP" application. Then when you are in phone
mode, just press 7 sec. the "Forward" button.
www.midlandeurope.com