Cordless: Adjustments - BRONDI DC6010TR Manual De Instrucciones

SAVE IN THE NUMBER BOOK, CANCELLING A NUMBER OF THE LIST
1. With handset in stanbdby, press the button MENU.
2. Press once the button CH- and then
3. Use the buttons CH+ and CH- to scroll the list.
4. Press the button
a. "Save":
1) press the button
to associate to the telephone number;
2) press to confi rm. You will hear a confi rmation beep, and the display returns
to stand-by.
b. "Delete":
1) press the button
2) press again the button
the display shows a number of the list. Press the button
c. "Deletel all":
1) press the button
2) press again the button
display returns to stand-by.
NOTE: If there is no number in the list, the display shows "
7.3.1 CUSTOMISATION OF CORDLESS NAME
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select "
".
Setting
2. Press twice the button
to confi rm, the handset returns to stand-by.
7.3.2 OPERATOR'S CODE
This function allows you to program up to 3 codes of telephone companies, so that you can
pre-set them to the telephone number quickly, any time you want.
PROGRAMMING THE CODES AND THE COMPANY NAMES
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select "
".
Setting
2. Press the button
the choice.
3. Select " 1. Number 1
the 2 other positions using the button CH-, before pressing
4. The display shows "
Enter number
5. Dial the code of the telephone company (max 12 fi gures) and press
display shows "
Enter number
6. Insert the name of the telephone company and press
7. The display returns to the cordless menu, press the button
USE OF THE FUNCTION
If you want to make a call using one of the company codes previously programmed:
1. In stand-by press the button
company and, when it is selected, press again
2. Dial the telephone number, and press the button
company selected by you.
7.3.3 ACCESS CODE TO CALL THE NUMBER OF THE "CALLS RECEIVED" LIST (operation under
switchboard)
If your cordless is connected to a PABX switchboard and if this latter is fi tted for the caller's
identifi cation service, in order to recall the number from the list of calls received, you must
adjust the access code of the switchboard.
NB: The cordless stores the numbers of calls received only if the caller's identifi cation service is
activated at your telephone company.
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select "
".
Setting
2. Press the button
confi rm the choice.
3. Insert the code and press
DC6010TR-lingue
.
and select between:
, the display shows "
, the display shows "
to confi rm. You will hear a confi rmation beep, and
, the display shows "
to confi rm. You will hear a confi rmation beep and the

7.3 CORDLESS: ADJUSTMENTS

, the display shows "
HS Name
, and scroll the menu up to select "
" and press if you want to adjust the fi rst code, or select one of
".
".
, and scroll the list to choose the name of the telephone
, and scroll the menu up to select "
to confi rm. Press the button
15
15
": dial the name you want
Enter name
".
Delete
to return to stand-by.
";
Delete all ?
".
No Number
"; dial the name and then press
", press
Callbycall
.
to confi rm, the
; the code shall be stored.
to return to stand-by.
;
, the call will be made using the
", press
Access code
to return to stand-by.
28-10-2005, 14:14
3. HS
3. HS
to confi rm
3. HS
to