Tones; System - BRONDI DC6010TR Manual De Instrucciones

7.3.4 MENU LANGUAGE SELECTION
1. Press MENU
2. Press twice the button CH-
3. Press the button
4. Press 3 times the button CH-
5. Press the button
6. Press the button CH-:
a. One time:
b. Two times:
c. Three times:
d. Four times:
e. Five times:
f. Six times:
g. Seven times:
7. Press to confi rm the choice.
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select "
".

Tones

2. Press the button
confi rm using the button
1) " ": every time you press a button, the cordless sopunds (choose between
1. Key Tone
2 different sounds) or "Off" using the buttons CH+ and CH-. Press
2) " ": choose the type of melody for the cordless ring tone (1 to 10) using
2. Ring type
the buttons CH+ and CH-. Press
3) " ": choose the level of the cordless ring tone (1 to 3 or "Off") using the
3. Volume
buttons CH+ and CH-. Press
4) " ": you can associate to 2 telephone numbers two different melodies;
4. VIP ring
onde adjusted the melodies (if the caller's identifi cation service is activated at your
telephone company, asnd the switchboard supports this function is the cordless is
connected), every time you receive a call from one of the 2 numbers, the cordless wil
sound with the associated melody.
• Select between "
, the display shows "
• Dial the telephone number and press
and the ring tone adjusted (second line).
• Use CH+ and CH- to select the melody, then press
5) Press the button
To access the adjustment of functions "5. System", you must insert the secret PIN code, that
adjusted at the factory is 0000.
7.5.1CHANGE OF CORDLESS PIN CODE
You can modify the PIN code of the cordless as follows:
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select "
".

System

2. Press the button
3. Insert the PIN code (the factory adjusted is 0000) and press twice
" ".
New PIN
4. Dial the new code (4 fi gures) and press
5. Dial again the code and press
beep, otherwise an error sound.
6. Press the button
7.5.2 REGISTERING CORDLESS PHONES (MULTI-CORDLESS FUNCTION)
The base of your DC6010TR can be used with several cordless phones DC6010TR (up to 4);
follow the procedure to register the cordless phones on the base.
1. Press MENU and then use the buttons CH+ and CH- to scroll the list, up to select "
".
System
2. Press the button
and scroll the list up to select "
" ".
Access Code ?
DC6010TR-lingue
" "
1. English
" "
2. Italian
" "
3. French
" "
4. Dutch
" "
5. Spanish
" "
6. Portuguese
" "
7. German
7.4 TONES
, now scroll the menu using the buttons CH+ and CH- and then
to select between:
to confi rm.
to confi rm.
" and "
1. VIP ring type 1
".
Enter number
to leave Programming and to return to stand-by.
7.5 SYSTEM
, the display shows "
Enter PIN PT
, the display shows "
, if the code is correct, you will hear a confi rmation
to return to stand-by.
, insert the PIN code of the cordless (4 fi gures, default is 0000), press
2. Record ", press the button
16
16
to confi rm.
" and press
2. VIP ring type 2
, the display shows " Mel. VIP
to confi rm.
".
, the display shows
Con f . PIN
".
. The display shows
28-10-2005, 14:14
4.
" (fi rst line)
5.
5.