Deleting A Chase - afx light DMX512-PRO Manual De Instrucciones

Fig. 7.14 Chase in automatic mode
• AUTO: The individual steps of the chase run at the adjusted speed and fade time.
Use the pan wheel to adjust the running speed, i.e. how long a scene is shown,
between 10 minutes and 0.1 seconds (indication "Wait").
Use the tilt wheel to adjust the fade time, i.e. the time between the steps, between 0
and 30 (indication "Fade").
5. A flashing LED indicates which chase can be adjusted when several chases are
selected simultaneously. The chase selected last can be adjusted. To adjust a
different chase instead, keep the corresponding number button pressed until its LED
flashes.
6. To stop a chase, press the corresponding number button so that its LED
extinguishes.
Adjusting Fade In for the Color Channels
Fig. 7.15 Adjusting a fade in time
It is possible to adjust a fade in time for chases affecting the RGBW color channels
1-4 and the dimmer channel. The controller automatically creates all necessary
intermediate values. Keep the button FIXTURE pressed and simultaneously adjust the
fade in time with the pan wheel between 0-30 seconds. When turning the wheel, the
display indicates the selected value in the lower line, e.g. "Fade 8.5S" for a fade in
lasting 8.5 seconds.
Overwriting Channels Manually
During the playback of a chase, it is possible to overwrite the programmed DMX
values with the sliding controls. This allows for minor adjustments during a live
performance without the need for reprogramming scenes.
1. Press the button FIXTURE use the number buttons 1-16 to select the units to be
controlled manually.
2. Adjust the desired DMX values for the DMX channels using the sliding controls
and, if necessary, the pan and tilt wheels.
3. If necessary, use the button PAGE to switch between the two channel groups 1-16
(LED A lights) and 17-32 (LED B lights) and repeat steps 1 and 2, until the desired
values are assigned to all channels.

Deleting a Chase

Fig. 7.16 Programming mode
©Copyright Lotronic 2018
Auto
Wait 1M10S
Manual
Fade 8.5S
Manual DMX512-PRO
Program
18