If the battery is run down (motor stops), be sure to
switch the On/Off switch to 0 and place the appliance
in the charging unit.
Make sure you do not leave the appliance switched
on when putting it aside if the battery is run down.
Make sure the appliance is switched off (On/ Off
switch to 0) when you place it in the charging unit.
6. What should I do if ...
... the appliance will not switch on?
Is the battery low? Plug in the mains adapter for the
charging unit and charge the trimmer.
Is the blade set dry? The blade set must be oiled. Pro-
ceed as described on page 15.
... the blade set "sticks"?
The blade set must be oiled. Proceed as described on
page 15.
... the charging indicator does not light up when
charging?
Clean the charging contacts.
The appliance may not be positioned correctly in the
charging unit. Position it correctly.
Is the charging unit properly connected?
... the appliance switches itself off?
The battery is low. Charge the trimmer.
... the battery will no longer charge?
Send the appliance to Aesculap. Our customer service
technicians will fit a new battery and ensure environ-
mentally sound disposal of the old one.
... the device does not turn on?
Is the shaver head dirty/sticky? Unscrew the shaver
head.
Check that the machine is running.
– If yes, clean and oil the shaver head, see "Cleaning
and care" from page 15.
– If no, send the machine to the Aesculap repair
service.
17