GB
Keep hair and loose clothing away from the openings of the device. During
operation, the device sucks in air and can cause injury if it sucks in hair or loose
clothing.
Do not use the device on surfaces that are covered with cement or other finely-
porous surfaces or surfaces covered with materials that are toxic when inhaled.
Do not allow the power brushes to run over cables etc. because they can get
caught up in the rotating brush and damaged.
After using the UV light brush, allow the UV-C lamp to cool sufficiently.
UV-C rays are harmful to eyes and skin. Never place your hand under the UV
light brush while it is being used. Do not look into the UV-C lamp.
NOTE!
RISK OF DAMAGE!
The improper handling of the device may result in damage to the device itself.
Do not cover the air vents on the device during operation.
Keep the device and mains adapter away from hot surfaces. Never subject the
device to high temperatures (heating etc.) or climatic conditions (rain etc.).
Never fill the housing of the device with liquid.
Remove blockages caused by dust, fluff, hair etc. because they reduce the
appliance's suction power.
Do not continue to use the device if the plastic components display cracks or
fissures or have become deformed. Only replace damaged parts with suitable
original replacement parts.
NEVER block the infrared sensors on the bottom of the UV light brush.
Before first use
1. Check that the set includes all the parts and inspect them for transport damage.
The content of the set that you have purchased is indicated on the packaging or a separate insert. If
you wish to make a complaint, please contact our customer service team.
2. Remove the packaging and any labels that have been affixed to the product for protection during
transportation or advertising purposes.
3. Insert the battery and charge it.
26
Instruction manual