Maintenance And Cleaning - Pontec PondoStar LED Set 1 Instrucciones De Uso

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injury.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water:
Isolate the units and installations (switch off and disconnect from the power supply) before reaching into the
water.
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.
Cleaning the unit
If necessary, clean the unit with clear water using a soft brush.
Replacing the bulb
PondoStar LED Set 1
Not possible.
PondoStar LED Set 3
Only use original bulbs from PfG GmbH. Light bulb rating: max. 1 W.
3. How to proceed:
0.
D
1. Unscrew the threaded ring.
2. Remove the glass pane and O ring, and check for damage (if damaged, dispose of the unit).
3. Take the defective bulb out of the housing and insert a new bulb (do not touch with your hands, use a cloth or
similar).
4. Reassemble the unit in the reverse order. Ensure that the O ring is correctly positioned.
5. Reconnect to the power supply and check the function.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
23909-12-13_GA_PondoStar LED-Set11 11
- GB -
04.12.2013 11:14:58
11