TRAPP ES-500 Manual De Instrucciones página 38

Wear proper clothes. Wear neither loose
 
clothes nor jewelry.
Take precautions against accidental running.
 
Make sure the switch is set to "off" before plugging
the equipment in. Failure to do so may cause a
serious accident.
Remove all objects before turning on the
 
equipment. A tool or any other object stuck in
the movable parts of the equipment may result in
an injury.
4 - Use and care
Do not overuse the equipment. Use it in the
 
right way and for the purposes described in this
manual for better performance and safety while
working.
Do not use the equipment if the switch
 
does not turn on/off. The equipment can not
be controlled if the on/off switch is damaged. A
defective switch shall be immediately repaired.
Switch off the circuit breaker, remove
 
the fuses or unplug the equipment before
servicing, substituting the cutting blades and
accessories. These safety preventive measures
reduce the risk of accidental operation of the
equipment.
Do not allow people that are not familiarized
 
with the equipment to use it. The equipment
may become dangerous in the hands of people
not familiar with its operation.
Preserve your equipment. Frequently check
 
if the movable parts are fixed, if any component
is damaged or check for any other condition
that may affect its optimum operation. Shall any
problem arise, fix it before using the equipment.
Many accidents are caused by lack of proper
maintenance.
38
Keep the cutting blade sharp and clean.
 
The cutting blade keeps moving after the
 
equipment is switched off. Therefore be aware
of that when servicing.
Use the equipment and accessories
 
according to the instructions in this manual.
Take in consideration the working conditions and
the service to be done. Using the equipment for
operations not. covered in this manual may result
in dangerous situations.
Note:
According to the Brazilian standard NBR
5410, it is compulsory to install a device to
protect against residual differential current
(DR device) in the electrical installation of
your residence. The function of the "DR" is
to protect the user against serious electrical
shock risk (consult an electrician).
5 - Service
C all qualified professionals to service the
 
equipment. Use original parts only. Always
call TRAPP Authorized Service Technicians.
TRAPP is not responsible for occasional
accidents caused by the use of spare parts
that are not original.
www.trapp.com.br