SKYLOTEC MILAN Instrucciones De Uso página 4

MILAN / MILAN 2.0
GB
READ AND FOLLOW PROVIDED INSTRUCTIONS! The device must only
be used by trained persons having the essential knowledge! Failure to
follow all instructions may result in serious injury or death.
The device has to be inspected in accordance with the provided manufacturers instruction:
• Optical and functional inspection by user before each use.
• Maintenance after each use or at least once a year if it is not in "SEAL PAC
WARNING: Maintenance must be done by an expert, who is trained and certified by the manufactu-
rer. NEVER ATTEMPT FIELD REPAIRS.
Use only with original SKYLOTEC harnesses and connectors or those which are approved by SKYLO-
TEC. The device must only be used with original rope type "SKYLOTEC SUPER STATIC 9 mm".
WARNING: Do not use incompatible rope!
WARNING: Avoid descending into electrical, thermal, chemical sources or other hazards.
DO NOT expose rope to sharp edges, abrasive surfaces, sparks, flames or heat.
The device has an automatic breaking system.
The device can be used bi-directional.
This instruction shall be provided to the rescuer!
4
"
®