Information On Safety - MCS Master BCF 230RB Manual De Instrucciones

en
1... SAFETY INFORMATION
2... UNPACKING
3... ASSEMBLY AND INSTALLATION
(ONLY FOR QUALIFIED PERSONNEL)
4... ANOMALIES
5... CLEANING AND MAINTENANCE
6... FUNCTIONING ANOMALIES
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL PRIOR
TO ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE ON THIS
COOLER. USING THE COOLER INCORRECTLY CAN CAUSE SERIOUS OR FATAL
INJURIES. KEEP THIS MANUAL FOR FURTHER REFERENCE.
►►1. INFORMATION ON
SAFETY
IMPORTANT: This appliance is not
suitable for use by persons (including
children) with
sensory and mental capacities or
with lack of experience or knowledge
unless supervised
responsible for their safety. Children
must be supervised to make sure they
do not play with the appliance.
►1.1. During installation, the electrical
connection, water connection, use
and maintenance of the cooler,
comply with all local regulations
and standards in force.
►1.2. The cooler must only be
installed, adjusted and serviced by
qualified personnel.
►1.3. Use this appliance to cool,
dehumidify, ventilate or remove
dust.
►1.4. In order to prevent the risk of
fire or serious injuries, install the
cooler at a safe distance from heat
sources (fireplaces, fire, etc.), from
sparks (welding machines, electrical
panels, etc.) or from combustion
fumes (hoods, chimney flues, etc.).
Figures and texts of this book are protected by COPYRIGHT.
PARAGRAPH SUMMARY
reduced physical,
by a person
►1.5. Improper wiring or improper
installation can cause hazards or
serious damage.
►1.6. Before carrying
operation, make sure that the
cooler, the power supply cable, the
control panel, etc., are perfectly dry,
in order to prevent any hazard or
serious damage (never work with
wet hands).
►1.7. Only install outdoors.
►1.8. The cooler must be installed
on a stable and level structure, so
as to prevent any risk (the structure
and the plugs must be adequate to
support the weight of the appliance).
►1.9. The minimum safety distance
recommended between the cooler
and walls or other items is 0.5 m.
►1.10. A 0.8 m outlet for every 3,600
2
m /h of air supplied to the cooler
3
must be provided (always ensure
an exchange of air within the cooled
environment). In the event of forced
air ventilation, the amount extracted
should be less than 85% of the air
intake. Forced ventilation can be
combined with natural ventilation.
►1.11. Power the cooler solely with
the voltage and frequency specified
out any