Testing And Adjustment - Velleman PIR500 Manual Del Usuario

Ocultar thumbs Ver también para PIR500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• The device can operate in both day and night situations, thanks to the
adjustability of the PIR sensitivity and the light sensitivity. The duration of the
output signal can also be adjusted.
• The device can be installed in round as well as square pattresses.
• The detection indicator flashes once every time the device detects movement.
• Do not use this device to control a fluorescent lamp.
• Do not install the device where it can detect constantly moving objects, or near
temperature regulating devices such as air-conditioning and heating devices.
• This device should be installed, maintained and repaired by a qualified person.
4.
Installation
Please refer to illustration 4 on page 2 of this manual.
• Deactivate and remove the fuse of the electric circuit on which you want to
install the device.
• Take the front off the rest of the device.
• Connect the wiring to the terminals at the back of the device,
according to the diagram at the right.
• Insert the device into the pattress and fix it either with the screws
of the pattress through the mounting holes at the edges,
or with the screws of the device itself that widen the attachment clamps.
• Reinstall the fuse and switch it on
• Test and regulate the device (see "Testing and Adjustment") and put the
front back on.
5.

Testing and Adjustment

• Set the function switch (ill. 1, #5) to 'on', there should be a continuous output
signal (the lamp should be on).
• Set the switch to 'off', there should be no output signal (the lamp should be off).
• Set the switch to PIR and adjust the PIR and light sensitivity (ill. 1, #3 & 7) until
the reaction of the device to movement satisfies you.
• Determine how long the output signal should last by means of the timer
adjustment (ill. 1, #6).
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use
of this device. For more info concerning this product and the latest
version of this user manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by
Velleman nv. All worldwide rights reserved. No part of this manual may be
copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
04.06.2010
PIR500
4
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido