CEVIK CE-PROMIG 200 Manual De Instrucciones página 61

EN
Equipment structure:
Accessories structure:
1. Welding process selector.
2. Parameter setting.
3. Home screen button.
4. Parameter setting button= wire speed / diameter
/ inductance / 2T4T / HOT START / ARC FORCE.
5. Plug conection "Euro Style" for MIG/MAG torch.
6. Positive (+) welding output terminal.
7. Conection cable for polarity change.
8. Negative (-) welding output terminal.
9. MIG/MAG welding gas inlet.
10. Power switch ON/OFF.
11. Rating label.
12. Power cable.
13. Wire tensión adjustment.
14. Wire tensión arm & support roller.
15. Wire input guide.
16. Wire drive roller.
17. Drive roller retainer.
18. Wire spool retainer.
19. Spool brake adjustment.
20. Torch trigger switch.
21. Torch "Euro" connector.
61