Hama Soundcup-L Instrucciones De Uso página 12

G
Changing the fabric covers of the speaker:
Step 1: Insert the guitar pick into
the gap, where the fabric cover
meets the speaker body.
Step 3: Slide down the guitar
pick through the whole long side
of the fabric cover.
Step 4: Repeat step 1-3 on the
other long side of the fabric cover.
Step 5: Remove the fabric cover
from the body of the speaker
Step 2: Push the guitar pick and twist
it, to release the fabric cover from the
speaker.
Step 6: Place the new fabric
cover on the same position as
the removed cover was before,
and push it into place.
ATTENTION: The left and right
covers are not indentical. Please
make sure you place the left and
right cover on the corresponding
left and right side of the speaker
body.
Enjoy the brand-new
look of your speaker!