Accessmatic Fox 1000 C Manual De Usuario página 60

1000 P
Opening your life
1000 P
RO
Increase
1000 P
RO
force
Opening your life
1000 P
RO
Decrease
force
1000 P
RO
Opening your life
1000 P
RO
Increase
1000 P
RO
speed
Opening your life
1000 P
RO
Decreased
speed
1000 P
RO
RO
2. ADJUSTMENT OF THE OBSTRUCTION FORCE
CAUTION: The obstruction force setting is automatically established during
programming. Normally no adjustment is necessary.
a) Hold down the SET button until "1" appears on the display, then press the UP
Opening your life
button until "2" appears on the display to enter this function, and then release the
button.
b) Press the SET button again. The unit is now in force adjustment mode. then you
will see a "3" on the screen with a ashing dot.
c) Press the UP button to increase the force level or the DOWN button to decrease
it.
The minimum force is "1" and can be adjusted upwards. The maximum force is "5".
Opening your life d) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
NOTE: Force is set to 3 as factory standard.
3. TRAVEL SPEED CONFIGURATION
CAUTION: If you change the speed option again, you will cancel the previous trip
limit. The speed adjustment function will be available only after resetting the
travel limit.
a) Hold down the SET button until "1" appears on the display, then press the UP
Opening your life
button until "3" appears on the display to enter this setup item, and then release
the button.
b) Press the setup button again. The unit is now in speed adjustment mode. then
you will see a letter "A" with a ashing dot on the screen.
c) Press the UP and DOWN buttons to choose the speed. Figure "8" is 80% of the
travel speed. Figure "A" is the maximum speed.
d) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
Opening your life
NOTE: Travel speed is set to maximum speed "A" as factory standard.
Opening your life
19