Accessmatic Fox 1000 C Manual De Usuario página 63

1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Increase
height
Opening your life
1000 P
RO
Decrease
height
Opening your life
1000 P
RO
7. SETTING THE RETURN HEIGHT
a) Hold down the SET button until "1" appears on the display, then to enter this
function setting press the UP button until "7" appears on the display and then
release the button.
b) Press the SET button again. The unit is now in recoil height adjustment mode.
then you will see a "0" gure on the screen with a ashing dot.
c) Press the UP / DOWN button once to set the inversion height while closing (0 ~
9).
d) Press the UP button to increase or the DOWN button to decrease.
Figure "0" means the gate will bounce to the open limit position.
Figure 1 ~ 9 means the door will bounce to the full travel position. One tenth to
nine tenths of the entire route, etc.
e) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
Opening your life
22