Accessmatic Fox 1000 C Manual De Usuario página 64

1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Increase
Opening your life
1000 P
RO
Decrease
Opening your life
1000 P
RO
8. PARTIAL OPENING / HEIGHT CONFIGURATION
a) Hold down the SET button until "1" appears on the display, then to enter this
function setting press the UP button until "8" appears on the display and then
release the button.
b) Press the SET button again. The unit is now in partial height / opening adjust-
ment mode. And then you will see a "0" gure with ash point on the screen.
c) Press the UP / DOWN button once to select whether you want to open the
partial opening function or set the partial opening height (0 ~ 9). Press the UP
button to increase or the DOWN button to decrease.
The gure "0" means, closing the partial opening function.
Figure 1 ~ 9 establishes the partial open position of the entire stroke. One tenth to
nine tenths of the entire route, etc.
d) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
Note:
1. Partial opening / height is set to "0" as factory standard.
2. If you open the partial opening / height functions, the button recognition
functions will be disabled.
3. For other details, please refer to the remote control instruction manual very
carefully.
4. If you enable the partial opening functions and then disable this function later,
note that only the coded button I memorized at the beginning can now control
the opening motor.
Opening your life
23