Useful Advice - Argo R410A Instrucciones De Uso

2. Cleaning of Casing.
To clean the air conditioner, wipe it with a clean soft cloth, lightly
moisted. In case it is stained, moisten the cloth with soapy water.
Never use solvents or harsh chemicals, nor very hot water. Do not
pour water over the air conditioner to clean it: this will damage the
internal components and cause an electric shock hazard.
3. Storage.
If you are not going to make use of the air conditioner for a long
period, before storing it away clean the air filters and verify that both
the internal water tanks are empty. Always store the unit
in the vertical position. Do not put heavy objects on top of the unit
EG
and protect it with a cloth or a plastic bag.
4. Transport.
Keep the air conditioner in the vertical position during
transportation. If this is not possible, then lay it on the right side;
when at destination put the air conditioner back in the vertical posi-
tion and wait at least 4 hours before using it for cooling
5. For your safety care check periodically the conditions of the
electric supply cable; in case you should notice any damage
due to usage, call the nearest After Sale Service to get the
cable replaced.

USEFUL ADVICE

If your air conditioner doesn't work properly, before requesting service, verify that:
●
the plug is properly inserted into the power socket;
●
the circuit breaker is in the ON position and fuses have not blown;
● the air filter is not clogged;
● the flexible tube is correctly positioned without any sharp bends nor plies;
●
the difference between room temperature and set temperature is over 1°C;
●
you have correctly carried-out the instructions contained in this manual.
ATTENTION
The blinking of STANDBY lamp (3), together with the stop of the air conditioner indicate that the condensate water tank is full.
10
NO!
NO!