Clock Setting; Am/Fm Radio Operation - Roadstar RU-695D+BT Manual De Instrucciones

TO USE THE RADIO
1. Press the [POWER] button (1) to power ON;
2. Select the desired audio source by pressing the [MODE] button (4);
3. (Please see detailed instructions for each Source in the following chapters);
4. Adjust the volume with the [VOLUME KNOB] (1) to the desired level;
5. To power OFF the radio, press and hold the [POWER] button (1).

CLOCK SETTING

1. Press and hold [CLOCK] button (6) to access to the menu;
2. Use the [VOLUME KNOB] (1) to adjust the hour;
3. Confirm with the [CLOCK] button (6);
4. Use the [VOLUME KNOB] (1) to adjust the minutes;
5. Confirm with the [CLOCK] button (6).
NAVIGATE INTO THE MENU
1. Press the [MENU] button (1) to access to the options;
2. Use the [VOL KNOB] (1) to select setting preferences;
3. Confirm with the [ENTER] button (1);
4. Repeat step 2 and 3 to set other preferences.
EQ OPERATIONS
In any mode, you may press repeatedly the [EQ] button (11), to select between
FLAT / POP / CLASSIC / ROCK / JAZZ.
DAB RADIO OPERATION
1. Select "DAB" mode by pressing repeatedly the [MODE] button (4);
2. Use the [TUNE -/+] buttons (2/3) to select the desired radio station.
Note: In case there is No DAB Service, press and hold the [AMS] button (5) to start
scan.
INFO
When the radio station is playing, press the [INFO] button (5) repeatedly to cycle
through the information broadcasted by the radio.

AM/FM RADIO OPERATION

1. Select "RADIO" mode by pressing repeatedly the [MODE] button (4);
2. Select desired band by using the [BAND] button (5);
3. Use the [TUNE -/+] buttons (2/3) to select the desired radio station or press and
hold (2 seconds) to scan the next/previous available station.
STORE RADIO STATIONS AUTOMATICALLY:
Press & Hold the [AMS] button (5) (for 3 seconds) and the radio will automatically
scan the radio. During the scanning process, the radio will save the scanned stations
sequentially into the memory.
English 2