Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TO USE THE RADIO
1. Press the [POWER] button (1) to power ON;
2. Select the desired audio source by pressing the [MODE] button (4);
3. (Please see detailed instructions for each Source in the following chapters);
4. Adjust the volume with the [VOLUME KNOB] (1) to the desired level;
5. To power OFF the radio, press and hold the [POWER] button (1).
CLOCK SETTING
1.
Press and hold [CLOCK] button (6) to access to the menu;
2.
Use the [VOLUME KNOB] (1) to adjust the hour;
3.
Confirm with the [CLOCK] button (6);
4.
Use the [VOLUME KNOB] (1) to adjust the minutes;
5.
Confirm with the [CLOCK] button (6).
NAVIGATE INTO THE MENU
1.
Press the [MENU] button (18) to access to the options;
2.
Use the [VOL KNOB] (1) to select setting preferences;
3.
Confirm with the [ENTER] button (18);
4.
Repeat step 2 and 3 to set other preferences.
EQ OPERATIONS
In any mode, you may press repeatedly the [EQ] button (11), to select between
FLAT / POP / CLASSIC / ROCK / JAZZ.
AM/FM RADIO OPERATION
1.
Select "RADIO" mode by pressing repeatedly the [MODE] button (4);
2.
Select desired band by using the [BAND] button (5);
3.
Press to scan the next/previous available station
Note: Press and hold (2 seconds) the [TUNE -/+] buttons (2/3) to select manual
(steps of 0.05MHz) or auto scan (next/previous available station).
STORE RADIO STATIONS AUTOMATICALLY:
Press & Hold the [AMS] button (5) (for 3 seconds) and the radio will automatically
scan the radio. During the scanning process, the radio will save the scanned stations
sequentially into the memory.
PRESET
There are 6 x 3 (FM1, FM2, FM3) presets available for FM and 6 x 2 (AM1, AM2)
presets for AM.
1.
Set the desired radio station frequency as explained previously;
2.
Press and hold the [PRESET] button (12 to 17 of the remote).
To Recall a preset station press the [PRESET] button (12 to 17).
English
2
Publicidad
Tabla de contenido
