Cleaning And Storage; Technical Specifications - JOCCA 9625 Manual De Instrucciones

16-EN
-Once you have chosen and placed a head you want to use, plug
in a device and slip a switch to a position On (switch on), a devi-
ce will start to operate. Then slide a device over the hair. When
you have finished cutting the hair, place a switch to a position Off
(switch off) and unplug it.
How to use the cutting guide.
The cutting guide is used when the hair to be cut is long and
thick.
It will make the cutting process easier; and for this please follow
the steps below:
-If the hair is very thick and this is long, place the cutting guide in
its highest position, moving the blades to a closer position and
therefore making the cutting process easier.
-If the hair thickness and length is normal, place the cutting guide
in its lowest position, making the blades separate.
The cutting guide can be adjusted to the position you desire in
order to make the cutting process more comfortable.

CLEANING AND STORAGE

-Unplug the hair clipper before cleaning it.
-Do not use alcohol, acetone, petrol or abrasive cleaning agents
to clean the plastic parts.
-Clean the hair clipper every time it is used to prevent the accu-
mulation of grease and other remains.
-Clean the external surface of the hair clipper using a slightly wet
cloth first and then a dry cloth.
-Never submerge the hair clipper in water.
-Store the hair clipper in a dry place once it has cooled down and
do not roll the cable around it.

TECHNICAL SPECIFICATIONS

230V ~50Hz 7W
This device conforms to the safety requirements and provisions
of directives 2014/35/EU on Low tension devices and 2014/30/EU
on Electromagnetic Compatibility.
PRODUCT RECYCLING - ENVIRONMENT
____________________________________
Packaging
The materials used in this product's packaging are
integrated in a system of waste collection, sorting and
recycling. If you wish to dispose of these materials,
you should use rubbish bins or other municipal
means of waste collection that are appropriate for
each type of material.
Electrical and Electronic Product
This symbol means that if you wish to dispose of this
product at the end of its life, you must take it to a
waste collection company authorized for the selective
collection of Waste Electronic and Electrical
Equipment (WEEE).
This product does not contain concentrations of
materials considered harmful to the environment.
EN-17