• Switch-controlled L.E.D. light positioned along the inner sides.
8. HEALTH AND SAFETY PRECAUTIONS
The manufacturer has designed and built the machine taking account of the results of apreventive accurate
SAFETY and HEALTH risk analysis.
The protections and devices fitted on the machine therefore comply with the safety levels established by the
specific EEC directives.
Information on and illustrations of said protections and devices to enable the machine user to operate in
conditions of maximum possible safety are provided below..
Mechanical precautions
The machine is provided with protections designed to prevent accidental contact with the moving parts. In
particular:
• The motor fan is protected by a grille fixed by means of screws to prevent access (danger of shearing).
• The fan positioned on the center and rear (Dual Temperature) of the machine is protected by a metal grill that
prevents the achievement (danger of cutting).
• The machine base is provided with 4 adjustable feet. The machine is stable and does not require any
anchoring to the floor (danger of impact).
20
CT81900001
Rev.01 – 07/13