Signs And Symbols - Enofrigo GRACE 2 Manual De Instrucciones

Electrical precautions
The precautions established by the 2006/95/CEE directive and the EN 60335 standard have been adopted to
protect against the danger of direct and indirect contacts and all the scheduled tests have been performed as
certified by the CE declaration of conformity (see attachment C). All the tests provided for by the current
technical regulations for implementation of the EEC directive concerning EMC (2006/95/CEE) have also
been performed.In particular:
• The components are all guaranteed by the manufacturers (each one bears the guaran-
tee marking).
• The equipment and all other electrical components are fitted inside closed compartments in order to prevent
any DIRECT contact with live parts. The box containing the electrical wiring is provided with the electrical
current danger sign:
• To protect against INDIRECT contacts, all the metal parts are earthed by means of anappropriate lead. Via the
plug-socket connection, this lead must ensure electrical continuity between the machine and the general earth
system; the suitability and efficiency of the general system and the accessory equipment necessary for cutting
off the power supply in the event of a fault are the responsibility of the machine user..
Remember that the socket, interlocked with the switch, must be positioned at a height of approximately 130 cm
from the floor and in a position that does not expo se it to knocks and damage.
Hygiene precautions
The refrigeration system contains freon gas R134A and contains no CFC to ensure protection of the ozone
layer.
Noise precautions
The compressor, the only possible source of noise, is located inside the machine and the-
refore the machine does not produce irritating or harmful noise
9. SIGN AND SIMBOLS
The safety signs draw the operator's attention to possible dangers for the purposes of safety.
Check the perfect condition of all colours and words on the signs and symbols.
As soon as they become even slightly damaged, request the manufacturer or authorised dealer for a copy and
replace them.
21 CT81900001 Rev.01 – 07/13