Festo 8049382 Manual De Instrucciones página 21

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maximum permissible current loads for cables and devices must not be exceeded.
Always compare the current ratings of the device, the cable, and the fuse.
In the event that these are not the same, use a separate upstream fuse in order to
provide appropriate overcurrent protection.
Use only connecting cables with safety plugs for electrical connections.
When laying connecting cables, make sure they are not kinked or pinched.
Do not lay cables over hot surfaces.
Hot surfaces are identified with a corresponding warning symbol.
Make sure that connecting cables are not subjected to continuous tensile loads.
When replacing fuses, use specified fuses only with the correct current ratings and tripping
characteristics.
The device is not equipped with an integrated fuse unless otherwise specified in the technical data.
Always pull on the plug when disconnecting connecting cables; never pull the cable.
Hazard-free operation of the device is no longer possible in the case of:
Visible damage
Malfunction
Incorrect storage
Incorrect transport
Switch off the power supply immediately.
Protect the device against inadvertent restart.
© Festo Didactic 8049630
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8049633

Tabla de contenido