Twin-Star International 25MM5045 Manual De Instrucciones página 8

7.Choose desired height of Wood Shelf (H) and
place the four Shelf Pin (DD) into same height
shelf holes inside side panels. Insert Wood Shelf
(H), allow Wood Shelf (H) to rest on the Shelf Pin
(DD).
8.There are levelers located under the mantel
which the height can be increased by
twisting counter-clockwise.
Hardware Used
DD
Shelf Pin
9. Remove the two mounting brackets attached to the
back of the Left and Right Front panels. Set aside
with the wood screws.
PLEASE READ ALL "ELECTRIC FIREPLACE
INSERT" INSTRUCTIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE INSERT IN
YOUR FIREPLACE CLOSE TO ITS FINAL
POSITION.
Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across Hearth/Base as it may scratch your unit.
Install the mounting brackets to hold insert fl ush
against the inside of the mantel front panel.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS FINAL
POSITION.
Fig. 7
x 16
Fig. 8
Completed
Unit
7
H
DD
Install
Insert
From
Back
Electric
Fireplace Insert