Risk Of Burns From Hot Fittings And Surfaces; Availability Of Operating Instructions; Schlüter ® -Bekotec-Therm-Rtbr; Structure - Schluter Systems BEKOTEC-THERM-RTBR Instrucciones De Montaje

GB

2.5.4 Risk of burns from hot fittings and surfaces

▶ Allow the product to cool down prior to starting the work.
▶ Wear appropriate protective clothing to avoid unprotected contact with hot fittings and system components.

2.5.5 Availability of operating instructions

Anyone working with this product must read and observe these instructions and all supplementary guidelines (e.g. accessory instructions). The instruc-
tions must be available at the product installation site.
▶ Hand these instructions and all relevant guidelines (e.g. accessory instructions) over to the operator.
3.1 Schlüter

3.1.1 Structure

µ
Fig. 1: Structure of BEKOTEC-THERM-RTBR
22 22
Safety-related information / Schlüter
-BEKOTEC-THERM-RTBR
®
1
Fixing Angle
2
Installation box
3
Return temperature limit valve
4
Flushing and venting valve
5
Thermostat valve connection for remote adjustment
(set piston), pre-adjustable
6
Cover plate incl. thermostat with remote adjustment
7
Dial
8
Set piston
9
Valve insulation

Valve connector G ¾ AG (Euro cone acc. to DIN EN 16313)
-BEKOTEC-THERM-RTBR
®