Radio Operation - Ricatech RR300 Manual De Usuario

LOCATION OF CONTROL – MAIN UNIT
1. LIGHT KNOB
2. TUNING KNOB
3. AM/FM KNOB
4. MODE SELECTOR
5. VOLUME KNOB

RADIO OPERATION

1. Slide the function selector to RADIO to turn the power on
2. Turn AM/FM knob to your designed band
3. Rotate the TUNING knob to find the radio station of your choice.
4. Adjust listening level with VOLUME knob.
5. To turn off the unit, slide the function selector to OFF
NOTE
• THE BUILT-IN AM ANTENNA IS DIRECTIONAL. TURN RADIO SLIGHTLY FOR BEST RECEPTION.
• THE SMALL FLEXIBLE WIRE ON THE BACK COVER IS THE FM ANTENNA, FOR BEST RECEPTION EXTEND
THIS WIRE TO ITS FULL LENGTH.
LIGHT OPERATION
1. Turn the LIGHT knob clockwise until to hear click sound to turn on the light.
2. To turn off the light, turn the LIGHT knob counter-clockwise to turn off the light.
AUXILIARY CONNECTION "AUX IN"
1. Slide the function selector to AUX to turn the power on
2. Connect your own device (i.e. MP3 player or IPOD) to the "AUX IN connection"
(located at the back of cabinet) with stereo plug and detachable rack (packed separately).
3. Adjust the ON / OFF switch next to the jack to the 'ON' position.
4. Adjust the listening level with the VOLUME knob or the volume control of the device.
5. When change to another mode, the device will continue to play with no sound until the ON / OFF switch is adjusted to
'OFF' position and switch off the device.
6. To turn off the unit, slide the function selector to OFF
NOTE: ADJUST THE ON / OFF SWITCH TO THE 'OFF' POSITION WHEN NOT IN USE.