Lincar 696T Manual Del Usuario página 39

IGNITION
Put on the brazier lighting-cube or a small quantity of paper, around 0,5 kg of wood in
•
small pieces. Put the knob of the water thermostat at max. position. Light the paper and
close the foyer door. If necessary open the ash drawer door and shift a little bit the drawr
as indicated in Fig. 1.
When the appliance is completely lighted, add some larger wood pieces. Repeat this
•
operation till when the appliance has reached the " Hourly Charge " as indicated in the
technical details: If previously the ash drawer door had been opened, remeber to close it
The loading of combustible should be done when the flame is minimum to avoid
•
combustion products or fumes outlet from the fire door.
During the appliance's functioning, it's advisable to set several times the ash-grate to
•
clean often the brazier.
N.B. During the first phases of functioning it is possible the formation of condensate on
•
the boiler wall, this is caused by the low temperature of the water inside the boiler. This
will disappear once the water has reached the working temperature. This situation could
go on for several hours, until all the water of the heating plant has been heated.
Shift a little bit the ash drawer
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 696T-696TL-697FT-697FTL
GB GB FR FR ES ES
39/92
Fig. 1