Switching Off The Mouse; Adjusting The Sensitivity Of The Mouse (Dpi Number); Battery Status Led - Cherry MW 2110 Manual De Instrucciones

five short ones when the battery is fully
charged. The LED flashes only once briefly
when the battery is almost discharged.

2 Switching off the mouse

The mouse switches to energy-saving mode
if it is not moved for 0.2 seconds. It detects
any movement and does not need to be
switched on again.
However, it still consumes power in the
energy-saving mode, therefore you should
switch it off manually for longer periods of
disuse or for transporting.
• Press the DPI/
The LED lights up and goes out gradually.
switch for 3 seconds.
3 Adjusting the sensitivity
of the mouse (dpi
number)
You can change the resolution of the mouse
sensor between 1000, 1500 and 2000 dpi for
precise work.
• Briefly press the DPI/
The LED flashes depending on the setting:
1x = 1000 dpi (default)
2x = 1500 dpi
3x = 2000 dpi
4 Tips

4.1 Battery status LED

After the LED flashes, the battery soon
needs to be changed.
switch.
13