Time; Setting Procedure - Lynx 4HT-416 XP Instrucciones De Uso

The cooking time has
elapsed
Note

Time

Setting procedure

Example: 13:00
A signal sounds. The oven switches off.
Press the j button twice and switch off the function
selector.
You can change the setting while the symbol is
flashing. The setting has been adopted if the symbol
lights up permanently. You may change the waiting
time that elapses before the setting is adopted. See
the Basic settings section for more details.
When the oven is first connected, or following a power
cut, the j symbol and three zeros flash in the display.
Set the time.
The function selector must be switched off.
1.
Press the j clock button.
12.00 appears in the display and the
flashes.
2.
Set the time using the + or - button.
The time selected is adopted after a few seconds.
j symbol
15