Replacing The Oven Light - Lynx 4HT-416 XP Instrucciones De Uso

Replacing the oven
light
Method
Replacing the glass cover
If the oven light fails, it must be replaced.
Heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
1.
Disconnect the appliance from the mains.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Unscrew the glass cover by turning it anti-
clockwise.
4.
Replace the oven light with one of the same type.
5.
Screw the glass cover back on.
6.
Remove the tea towel and connect the appliance
from the mains.
The glass cover on the oven light must be replaced if it
is damaged. Replacement glass covers may be
obtained from the after sales service. To this end,
please specify the E number and FD number of your
appliance.
21