Wireless Remote Controller; Name Of Parts - Fujitsu ABYG45LRTA Manual De Funcionamiento

FEATURES AND FUNCTIONS
n Remote controller

WIRELESS REMOTE CONTROLLER

The wireless remote controller allows convenient control of air
conditioner operation.
WIRED REMOTE CONTROLLER (OPTION)
The optional wired remote controller can be used.
When you use remote controller, there are following different
points as compared with using wireless remote controller.

NAME OF PARTS

Indoor unit
8 9
1
6 5 4
En-4
7
3 2
[The additional functions for wired ones]
• Weekly timer
• Temperature set back timer
And you can use both wired and wireless remote controller
simultaneously.
(But function is limited)
When the restricted functions on the remote controller are
used, beeping sound will be heard, OPERATION, TIMER and
the 3rd lamp of the indoor unit will flash.
[The restricted functions for wireless ones]
• SLEEP timer
• TIMER (ON timer, OFF timer and Program timer)
• 10 °C HEAT operation
1 Control panel
2 MANUAL AUTO button
When the MANUAL AUTO button is pressed in for more
l
than 10 seconds, the forced cooling operation will start.
The forced cooling operation is used at the time of
l
installation.
Only for authorized service personnel's use.
When the forced cooling operation starts by any chance,
l
press the START/STOP button to stop the operation.
Please press the button at Filter Reset.
l
3 Remote control signal receiver
4 OPERATION indicator lamp (green)
5 TIMER indicator lamp (orange)
TIMER indicator lamp lights when the timer is set from
l
wireless remote controller.
If the TIMER indicator lamp flashes when the timer is
l
operating, it indicates that a fault has occurred with the
timer setting (see "AUTO Restart" on page 17.)
6 ECONOMY Indicator Lamp (green)
ECONOMY indicator lamp lights in the following
l
operations:
• ECONOMY operation
• 10 ºC HEAT operation (controlled by wireless remote
controller)
7 Intake grille
8 Up/down air direction flaps
9 Right/left air direction louvers
(behind up/down air direction flaps)