Tabla De Contenido; Description; Safety; Purpose Of This Manual - Greenlee 555 Serie Manual De Instrucciones

Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3-5
Grounding Instructions .................................................. 6
Specifications ................................................................ 6
Identification ...............................................................7-9
Bending Attachment Groups ..................................10-11
Setup ......................................................................12-13
Operation ................................................................14-15
Illustrated Bending Glossary ....................................... 16
Bending Instructions ..............................................17-18
Additional Bending Instructions .............................19-21
Additional Bending Tables ......................................22-27
Transporting Bender .................................................... 28
Maintenance ................................................................ 28
Greenlee / A Textron Company

Description

The Greenlee 555
to bend 1/2" to 2" conduit and pipe. Bending shoe
groups are available to accommodate the following
types of conduit and pipe:
• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Rigid Conduit
• PVC-Coated Rigid Conduit
• Schedule 40 Pipe
• Aluminum Rigid
• Stainless Steel
In addition to the 555
applies to the following models:
• 555CXRE/555DXRE (includes accessories for bending
Electrical Metallic Tubing, Rigid Conduit, and
Schedule 40 Pipe)
• 555CXRS/555DXRS (includes rigid single-shoe
accessories for bending Rigid Conduit and Schedule
40 Pipe)
• 555CXES/555DXES (includes EMT single-shoe
accessories for bending Electrical Metallic Tubing)

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee 555
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
555 is a registered trademark of Textron Innovations Inc.
KEEP THIS MANUAL
2
555 Series Electric Benders
®
Series Electric Benders are intended
®
Series benders, this manual also
®
Series Electric Benders.
®
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070