Proline VT23 Manual De Instrucciones página 6

ASSEMBLY
CAUTION:
DO NOT insert the mains plug into the mains socket until the fan
has been completely assembled. Never operate the fan with a
cracked or damaged fan blade.
Rear guard assembly
Unscrew the locking
nut from the fan motor
anticlockwise.
Position the rear guard
onto the motor housing, making sure that a protrusion on the
motor housing is inserted into the proper hole of the rear guard.
Insert the locking nut and turn it clockwise to lock the rear guard
into position.
Fan blade assembly
Slide the fan blade onto the motor spindle, making sure the
motor spindle is fully seated into the blade groove.
Front guard assembly
Remove the small securing screw and nut from the front guard.
Attention!
The hook of the front guard must be at
the top.
5
EG-4