Proline DWP 1247 WH Manual De Instrucciones página 41

NOTE: Refill the rinse aid when the optical level indicator becomes clear again, or when the
rinse aid indicator light illuminates.
Adjusting the rinse aid dispenser setting
The factory setting for the dishwasher is 5 and you can choose among 6 settings.
The amount of rinse aid dispensed is proportional to the selector position.
1. To adjust the rinse aid setting, remove the dispenser cap.
2. Use a screwdriver (not supplied) to rotate the rinse aid selector to
the desired position.
3. Replace the cap and turn it clockwise.
NOTE: The amount of rinse aid must be increased if the washed
dishes appear dull or feature circular stains. If the dishes are
sticky or have white streaks, it is necessary to reduce the
rinse aid setting.
Adding the detergent
To open the detergent dispenser cap, gently press the release button.
Add the detergent and close the cap carefully.
A detergent for main wash cycle
B detergent for pre‐wash cycle
NOTE: Use only detergent specifically formulated for
dishwashers. For optimal washing results it is important
to use a good quality detergent.
15