Palfinger MBB C 1500 L Manual De Instrucciones página 191

2.4. Tail Lift load capacity 1500 kg to 2500 kg – all pitches
Platform dimensions:
Control arm length:
Nominal load:
Platform heights : up to 2,000 mm
Platform heights : up to 2,200 mm
Platform heights : up to 2,400 mm
Platform heights : up to 2,600 mm
Platform heights : up to 2,800 mm
2.5. Tail Lift load capacity 2000 kg to 3000 kg – all pitches
Platform dimensions:
Control arm length:
Nominal load:
Platform heights : up to 2,000 mm
Platform heights : up to 2,200 mm
Platform heights : up to 2,400 mm
Platform heights : up to 2,600 mm
Platform heights : up to 2,800 mm
Platform heights : up to 3,000 mm
The condition of the tail lifts is to be inspected regularly according to VDI 2700.
3. Information on the loading
The tail lifts are in the position to secure loads in the location named under point 4 under maintenance of
the listed equipment named under point 3 under the following loading conditions:
• Sliding-friction value of a least
• Form-fit loading against driving direction
• Loading with clearance at least tail lifts width less 10 cm
4. Information on load
The tail lifts is assured for the following loads under maintenance of the conditions listed under point
2 and 3, according to the parameters of recognized rules of technology, e.g. acceleration values
according to DIN EN 12195-1, of the VDI directives 2700 following pages and the certificates and
appraisals.
TÜV NORD Mobilität GmbH & Co. KG
Hannover, 25.03.2015
Martin Keller
This certificate is comprised of 2 pages and is only valid in its complete form.
Code XL Certificate MBB PALFINGER GmbH LS0108545-Z1-A1_englisch
Height: 1,200 – 2,800 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø36 mm
700 to 1,100 mm
1,500 kg to 2,500 kg
Height: 1,200 – 3,000 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø40 mm
800 to 1,100 mm
2,000 kg to 3,000 kg
= 0.30
LS0108545Z1-A1
D
General cargo
Palletized loading
MBB PALFINGER GmbH
Ganderkesee
Signature of the responsible party
Permissible Demonstrated
load max. test forces
masses (DIN EN 12642)
16,000 kg 4,800 daN
14,500 kg 4,350 daN
13,000 kg 3,900 daN
11,500 kg 3,450 daN
10,000 kg 3,000 daN
21,000 kg 6,300 daN
19,000 kg 5,700 daN
17,000 kg 5,100 daN
15,000 kg 4,500 daN
13,000 kg 3,900 daN
11,000 kg 3,300 daN
Page 2 of 2
191