General Power Tool Safety Warnings - Makita JV143D Manual De Instrucciones

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Cutting action changing lever
5. Lock-off button
6. Switch trigger
7. Blade holder
8. Bolt
9. Hex wrench
SPECIFICATIONS
Length of stroke
Strokes per minute (min
Max. cutting capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
6
Explanation of general view
10. Blade
11. Roller
12. Hook
13. Dust cover
14. Cutting line
15. Base
16. Edge
17. Graduation
18. Starting hole
Model
-1
)
Blade type
Mild steel
Aluminum
Overall length
Net weight
Rated voltage
JV143D
0 - 2,900
Wood
245 mm
1.9 - 2.0 kg
D.C. 14.4 V
D.C.14.4 V Model
D.C.18 V Model
Save all warnings and
ENE019-1
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless jig saw safety warnings
GEA010-2
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
19. Hose
20. Rip fence (Guide rule)
21. Fence guide
22. Rip fence
23. Threaded knob
24. Pin
25. Aluminum base
26. Anti-splintering device
27. Cover plate
18 mm
B type
65 mm
6 mm
10 mm
BL1413G/BL1415G
BL1813G/BL1815G
DC18WA
JV183D
18 mm
0 - 2,900
B type
65 mm
6 mm
10 mm
248 mm
2.0 kg
D.C. 18 V
GEB187-1