Product Identification - Holmatro BCH1 Manual Del Usuario

2.7 Guarantee
Refer to the general terms and conditions of sale for the guarantee conditions, available from your
Holmatro dealer on request.
Holmatro draws your attention to the fact that every guarantee on your piece of equipment or system
will lapse and that you must indemnify Holmatro against any possible product liability and responsibility
if:
• service and maintenance are not carried out strictly in accordance with the instructions, repairs are
not performed by a Holmatro Certified Technician or are performed without prior written consent;
• self-made changes, structural changes, deactivation of safety devices, injudicious adjustment of
hydraulic valves and faulty repairs have been carried out;
• non-genuine Holmatro parts or lubricants other than the types prescribed are used;
• the piece of equipment or the system is used injudiciously, through errors of operation, improperly,
negligently or not in accordance with its nature and/or purpose.
3 Description
3.1 Equipment
The BCH*-series battery chargers have been specially developed for charging the Holmatro BPA28*-
series 28 V Li-ion battery packs.
NOTE
The battery chargers may only be used with the BPA28*-series battery packs.
3.2 Type designation
Example: BCH1
/i
Digit Example
1-3 BCH
4 1
3.3

Product identification

See Fig. 2.
/i
1 Adapter for the battery pack
2 Condition indicator label (see section 3.4)
3 Fastening points
3.4 Condition indicator label
See Fig. 3.
The battery charger has a condition indicator label that indicates:
• the condition of the battery charger (left part of the label, position A).
• the condition of the battery pack that is being charged (right part of the label, position B).
BCH1 / BCH2 / BCH3
Description
Battery Charger
Voltage:
BCH1: 220 - 240 VAC, 50/60 Hz
BCH2: 100 - 120 VAC, 50/60 Hz
BCH3: 12 - 24 VDC
916.001.320_006
4 Electrical contacts (for battery pack)
5 Power cord and power plug
EN
25