Technical Information; Technical Data; Safety Devices - Nussbaum JUMBO LIFT 3500 NT Instrucciones De Servicio

3

Technical information

3.1

Technical data

System load capacity
Load distribution
Weight
Effective lifting range of
the system
System lift time
System lowering time
Operating pressure
Operating voltage
Motor capacity
Motor speed
Oil pump conveying
power
Pressure relief valve
Filling volume oil con-
tainer
Noise level
On-site connection
OPI_JUMBO LIFT 3500 NT_V3.1_DE-EN-FR-ES-IT
3,500 kg
Max. 3:2 or 2:3 in or
counter to the drive-in
direction (Please not the
total centre of gravity of
the vehicle)
920 kg
Approx. 2,000 mm
Approx. 35 s with 3,500 kg
load
Approx. 30 s with 3,500 kg
load
Approx. 270 bars
3 x 400 Volt , 50 Hz
3 kW
3000 rpm
3 cm³
Approx. 300 bars
Approx. 14 litres
≤ 70 dB(A)
3~/N+PE, 400 V, 50 Hz
with 16 A fuses, slow,
according to VDE regu-
lations
3.2

Safety devices

• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Check valve
Secure the vehicle against unauthorised lowering
of the load suspension means.
• Two independent cylinder systems (each with a
command, follow system)
Secure against unauthorised lowering of the lift.
• Main switch with locking device
Fuse to prevent unauthorised use.
• Dead man controls
When the button "Lift" or
o
corresponding movement stops.
• Foot bumper on the lift (optional)
Guard against crushing in the foot area.
• CE-Stop
Guard against crushing in the foot area.
"Lower" is released, the
u
61