ADInstruments AD3348 Manual De Usuario página 20

_______________________________________________________________________________
Operation
NOTICES: Read and understand all warning and precaution statements listed in the safety section of
this operation manual prior to using this meter. Set the function select switch to the OFF
position when the meter is not in use.
DC+AC Power/Watt Measurements
current
Voltage
1.
Connect the test leads to the voltage source in parallel with the load.
2.
Clamp on one of the wire to the load.
3.
Select the range to Voltage AC or DC, and check the voltage reading.
4.
Select the range to Current AC or DC, and check the current reading.
5.
Select appropriate Watt range 40KW(0-250V,0-400A) or 240KW (0-600V,0-400A).
6.
Read the value shown on LCD in KW (AC+DC).
DC/AC Current
WARNING: Ensure that
disconnected from the
clamp measurements.
Select AC or DC with the
DC/AC Voltage
1. Insert the black test
and the
red test lead into the positive V terminal.
©Copyright Abacanto Digital SA.
A
A
Hz%
KW
No
Yes
. .
CAP CAP
.
n
A
DC + DC
A C
A C
Manual de usuario AD3348
Measurements
the test leads are
meter before making current
MODE button.
.
Measurements
n
A
+
lead into the negative COM terminal
AD Instruments
20