Safety Instructions; Disposal Considerations - Hilti HIT-RE 500-SD Manual De Instrucciones

Net contents: 330 ml / 500 ml

Safety instructions

C corrosive Dangerous for the environment
Risk phrases:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.
R20/22 Harmful by inhalation and if swallowed.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Safety phrases:
S1/2 Keep locked up and out of the reach of children.
S23 Do not breathe fumes.
S24/25 Avoid contact with skin and eyes.
S36/37/39 Wear suitable protecting clothing, gloves and eye protection.
S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
S26 In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice.
S28 After contact with the skin, wash immediately with plenty of soap and water.

Disposal considerations:

- Empty packs: May be disposed via the local Green Dot collecting system
150106 (mixed packaging materials)
- Full or only partially emptied packs must be disposed of as special waste in accordance with official regulations.
EAK waste material code: 200127* paint, inks, adhesives and resins containing dangerous substances.
Or EAK 080409* waste adhesives and sealants containing organic solvents or other dangerous substances.
Manufacturer: Hilti GmbH, Hiltistrasse 6; D-86916 Kaufering;
Made in Germany
Printed: 08.07.2013 | Doc-Nr: PUB / 5102026 / 000 / 04
Contains epoxy constituents.
See information supplied by the manufacturer.
contains: m-Xylenediamine
Net weight: 470 g / 710 g
Alkylglycidylether
or EAK waste material code
en
11