Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Aesculap Suhl GmbH
Battery-powered clipping machine Favorita
Legend
1 Blade adapter
2 Lever
3 Battery-powered clipping machine Favorita
4 Battery release lock
5 Charger
6 Mains power cord (with device plug)
7 Charging bay (for Li-ion battery)
8 Charge state indicator (for Li-ion battery)
9 Li-ion battery
10 Charge state indicator (for battery-powered
clipping machine Favorita
11 Charging bay (for battery-powered clipping
machine Favorita
/Libra)
CL
12 On/Off switch
13 Screw to fix casing
14 Pressure piece
15 Knurled screw
16 Leaf spring
17 Serration
18 Lower cutting plate
19 Upper cutting plate
Symbols on product
Adhere to instructions for use
Labeling
electronic devices according to
directive 2012/19/EU (WEEE),
see Chapter Disposal
2
/Libra
CL
/Libra)
CL
of
electric
and
/Libra
CL
Contents
1.
Safe handling ........................................................... 3
2.
Product description ................................................ 3
2.1
System components ............................................... 3
2.2
Components necessary for use ........................... 4
2.3
2.4
battery GT201 .......................................................... 4
2.5
2.6
battery GT201 .......................................................... 4
2.6.1 Charging principle .................................................. 4
2.6.2 Charging time .......................................................... 4
3.
Preparation and setup ........................................... 5
4.
CL
GT203/Li-ion battery GT201 ................................ 5
4.1
System set-up .......................................................... 5
4.1.1 Connecting the accessories.................................. 5
4.1.2 Attaching the Blade ............................................... 5
battery........................................................................ 6
4.2
4.3
Function checks of the charger .......................... 7
4.4
Safe handling: Blade .............................................. 7
4.4.1 Adjusting the plate pressure................................ 7
4.4.2 Sharpening the cutting plate .............................. 7
4.4.3 Removing the blade ............................................... 7
4.4.4 Lubricating the blade............................................. 7
4.4.5 Changing the Li-ion battery ................................ 8
5.
Processing ................................................................. 8
5.1
Cleaning/Disinfecting ............................................ 8
5.2
Control, care and inspection ............................... 9
6.
Maintenance ..........................................................10
7.
Troubleshooting list .............................................11
7.1
/Libra .....................................................11
7.2
Charger and Li-ion battery ................................11
8.
Technical Service ..................................................13
9.
Accessories/Spare parts ......................................14
/Libra ...................................... 4
/Libra ..................... 4
/Libra and charger
/Libra ...................................... 6
Publicidad
Capítulos
Tabla de contenido
