Alarm Setting - Drive Handy-Ox Instrucciones Para Su Uso

a)

Alarm setting

In the main menu interface, press the "up button" or "down button", and move the menu choice
bar to "Alarm", then press the "menu button" to enter the alarm setting menu of (Figure 8).
Figure 8
Alarm setting Menu
a. the high/low alarm limit setting
Press the "up button" or "down button" to choose the parameter to be adjusted, then press
the "menu button" again to enter the similar dialog box shown as figure 9, then press the "up
button" or "down button" to change data. Each press of the "up button" or "down button", the
data will raise or descend in single increments. Continue until the desired setting is reached,
then press the "menu button" to save the setting.
If the alarm function is on, the device will provide medium priority alarm signal when
the data of spO
the measure value becomes yellow.
or pulse rate is beyond the limit. Intermittent alarm will occur and
2
19
English