Drive Handy-Ox Instrucciones Para Su Uso página 22

b. When the "Start" is displayed in the menu, if the memory still has old data in storage, the "Do
you really want to recover the memory" dialog box will be displayed when pressing the "menu"
button. Press the "up button" or "down button" to choose setting, and press the "menu button"
to confirm setting, then the dialog box will be displayed as in figure 11. to set the starting time
for data storage by users, the user can change the setting value by pressing the "up button"
or "down button", and can confirm the setting value by pressing the "menu button". The black
cursor will move to next place after setting. When the black cursor moves to "Yes"(store) or
"No"(don't store), press the "up button" or "down button" to choose setting, then press the"menu
button" to confirm setting.
Figure 11
c. When the "Stop" is displayed in menu,the "Do you really want to stop recording" dialog box
will be displayed when pressing the "menu button". Press the "up button" or "down button" to
choose setting, then press the "menu button" to confirm setting.
d. If the data storage function is turned on, when return to the measure interface, a red "REC" sign
and a flashing red dot would appear on screen, which means the device is in the state of storing.
e. In the state of storing, whatever interface the device is in (measure interface, menu interface), the
sign "Recording" would appear on the screen in 30 seconds, then the screen will be automatically
shut down. If pressing any button(power on/off excluded) at this moment, the sign "Recording"
would appear on the screen, then the screen will be automatically shut down again; if pressing
the "power on/off button", the device would return to the former interface.
22
English