Important Safeguards; Polarization Instructions - T-Fal Easy Fry Compact digital Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
followed, including the following:
1.
Read all instructions before using.
2.
Do not touch hot surfaces. Use handles or knobs.
3.
To protect against electric shock, do not immerse cord, plugs or the
appliance in water or other liquid.
4.
Close supervision is necessary when any appliance is used by or near
children.
5.
Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning the appliance.
6.
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair
or adjustment.
7.
The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8.
Do not use outdoors.
9.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving appliance containing hot oil
or other hot liquids.
12. Always attach plug to appliance first (depending on model), then plug cord
into the wall outlet. To disconnect, turn any control to "off", then remove
plug from wall outlet.
13. Do not use appliance for other than intended use.
14. SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY.
15. Only connect the appliance to electrical sockets which have a minimum
load of 15A. If the sockets and the plug on the appliance should prove
incompatible, get a professionally qualified technician to replace the socket
with a more suitable one.

POLARIZATION INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock this plug is intended to fit into a polarized outlet only
one way. If the plug does not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug
in any way.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido