Bo Jungle B-Digital Baby Food Processor 6 in 1 Instrucciones De Uso página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Heating function:
1. Fill the water tank with about 50 ml of water.
2. Correctly install the blending jug and insert the steaming basket into the blending jug.
3. You can heat e.g. soup, baby milk, juice, water, baby food, etc. To do so, place the bottle/jar/... in the steaming basket and
cover it with the measuring cup.
4. Press the button for the heating function. The default operation time is 3 minutes. Press the + or – button to increase or
decrease the heating time. The time range should lie between 1 and 30 minutes.
5. Press the start button to start the appliance. Should you wish to pause the device whilst it is in operation, press the start
button again. Press once more to restart.
6. Once the heating cycle is completed, the appliance will beep and an indicator light will start flashing. All lights will switch off
automatically if no further actions are undertaken.
WARNING: Immediately after the heating cycle, the blending jug and its contents might be hot. You should always open the
jug lid very carefully and use the supplied tongs to remove the steaming basket from the device.
Keep warm function:
1. Insert the steaming basket in the blending jug and insert the food you wish to keep warm. Close the lid or place the
measuring cup over the steaming basket.
2. Fill the tank with 150 ml of water
3. Push the button for the keep-warm function: the default working time is 60 minutes; you can adjust the working time to a
time range between 1 and 8 hours. Please note however that it is not recommended to keep baby food and especially milk
warm for a long period of time, as this increases bacterial growth.
4. The appliance will start working after 2 seconds if no further actions are undertaken.
Descaling function:
A lime scale deposit may form on the bottom of the water tank after extended use, so the water tank should be cleaned
regularly to ensure normal use of the steaming function (we recommend descaling the device every 20 uses, depending on
water quality).
How to use the descaling function:
1. Always unplug the appliance before filling the tank.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido