Adjusting The Display - Bo Jungle B-Digital Baby Food Processor 6 in 1 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
INSTALLING THE BLENDING JUG
In order for the blending jug to be correctly installed, the steam inlet on the jug must line-up exactly with the steam outlet of the
device itself. To place the lid on the blending jug, turn it counterclockwise so that the hook on the jug lid fits exactly into the
notch in the housing of the device.

ADJUSTING THE DISPLAY

1. Tilt the display and move it upward.
2. Push the button and press the display down to make it flat again.
POWER CORD STORAGE
The power cord can be stored at the bottom of the appliance.
OPERATING INSTRUCTIONS
1. Plug the device in. You will hear a beeping sound and the light in the water tank will turn on.
2. Press the power switch. The control panel and display will light up and the device will become standby. The lights will switch
off automatically if no further actions are undertaken within 10 seconds.
FUNCTIONS
Steam Cooking:
1. Cut the food you want to steam into small cubes of no more than 3 cm.
2. In case you would like to steam only one food type, place the cubes of food into the large steaming basket and make sure the
jug lid is properly closed.
3. In case you would like to steam two food types which you would like to separate from eachother, you can add a second
steaming basket on top of the other one. To do so, put food in both baskets, then place the strainer on top of the smaller
one and turn to lock it. Place the smaller steaming basket upside down on top of the larger one, as shown below.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido