Technical Specifications; Important Safety Instructions - Please Read These Carefully; Filling The Water Tank - Bo Jungle B-Digital Baby Food Processor 6 in 1 Instrucciones De Uso

Thank you for choosing the B-Digital Baby Food Processor; we are convinced that you will
be fully satisfied with our product. Please take a few minutes to carefully read through
these instructions before using the product and keep them for future use.

TECHNICAL SPECIFICATIONS

Voltage
Water tank capacity
Blending jug capacity
Cooking capacity
Heating power
Blending power
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ THESE CAREFULLY:
- Before using the appliance for the first time, check if the electrical power supply voltage corresponds to the voltage that is
mentioned at the bottom of the appliance.
- Always place the appliance out of the reach of children. Make sure the power cord is also out of the reach of children. Do not
allow them to play with the appliance.
- Ensure that the unit is placed on a flat and dry surface and that there are no heat sources such as a window, radiator or
furnace in the direct vicinity of the appliance.
- Never immerse the device in water or any other liquid.
- Always unplug the device before filling the water tank.
- Any modification to this unit without permission of the manufacturer might prove dangerous.
- Unplug and clean the unit thoroughly when it is not to be used for a longer period of time.
- Clean the blending jug and all parts that have been in contact with food immediately after each use.
- Never touch the blades with your bare hands.
- Always make sure the water tank is empty before moving or transporting the device.
- Do not move the device whilst it is in operation.
IMPORTANT
Children or persons with physical, sensory or mental impairments should not be allowed to use this appliance unless they are
being supervised by an adult who is responsible for their safety.

FILLING THE WATER TANK

This device has a transparent window in the water tank, so that it is easy to determine if the water tank needs to be
replenished. The printed on measuring scale clearly indicates the amount of water that is in the tank and the number
of minutes that it will take before the water runs out when using the machine.
When filling up the water tank, be sure not to exceed the indicated maximum level. Close the cap carefully and place
back the tank cover.
For safety reasons, this device will stop working automatically when the water tank becomes empty. An indicator light
on the control panel will start burning and you will hear a sound alert. If this happens, unplug the device and refill
the water tank. Then restart the device if you would like to continue using it.
WARNING: Make sure there is water in the tank before steaming/heating/sterilizing/using the keep-warm function.
6
220V – 240 V
280 ml
900 ml
900 ml + 500 ml
700 W
120 W
EN